Skip to content

Methodology

Every planner on this site measures the same way. This page says how, and where it stops being reliable.

Does the drawing match the answer?

There is one drawing and one sum. When you drag a table, the planner measures its new corners and writes the verdict from that. If the drawing shows the table touching the wall, the answer says it touches the wall.

Why count footprint and clearance apart?

An object has two outlines. The solid one is the floor it actually stands on. The dashed one is the space around it you need kept free. Chair pull-out, treadmill run-off, the arc a Murphy bed sweeps as it comes down.

They fail differently, so the planner reports them differently:

Can I change the clearance numbers?

Wherever a planner needs a clearance, it asks you for it and shows you a default. The defaults are the figures the trade normally quotes, listed on the sources page. None of them is a rule with force behind it, and people argue about plenty of them. Change one and the answer moves.

How are the shapes handled?

Why does an object snap to the wall?

While you drag, an object pulls onto a wall, the middle of the room, or the edge of its neighbour. That happens when it comes within a few pixels. Turn the snap off and it goes exactly where you put it. Snapping only affects where things land; it never changes what the planner measures afterwards.

How are the numbers rounded?

Measurements show to the nearest inch in feet and inches, or two decimal places in metres. The sums underneath are done in metres at full precision, so the rounding is only in what you read. Where a figure is genuinely uncertain, such as how many people a table seats, the planner shows it as a range.

What do these planners not know?

The planners assume rooms are rectangular, with square corners. Few are. If yours is out by an inch across its length, take an inch off before you type it in.

Found a number that looks wrong?

If a number here is wrong, say so. Changes to any model get noted on this page.

How do I make this site?

I use AI tools to help write the code and draft the guides. Every planner runs against automated tests, and every figure traces to a source on the sources page. The guides include details from my own experience, which I add myself. If you find a mistake, tell me.