What size rug goes under a dining table?
Take the table, add 24 inches on every side, and buy the next rug size up. For a six-seat table of 72 by 36 inches, that is 120 by 84 inches. An 8 × 10 rug is 120 by 96, so it just covers it.
The 24 inches is there for the chairs. It is how far a chair moves back when someone stands up. If the rug is any smaller, the back legs drop off the edge every time someone gets up from the table.
Why 24 inches?
It is the same figure this site uses for a chair to pull out. Rug sellers’ guides repeat it as the minimum, and some suggest 30. Neither is a standard. Both are working rules, and both come from the chair.
Your own chairs may need more. A plain wooden side chair needs about 24 inches. Chairs with arms, or anything upholstered, usually want 28 to 32. The guide to space around a dining table shows how to measure yours in a minute. Use that number in place of 24.
With six at our table, 24 inches is not enough for us. 30 is. If your table is full most nights, or your chairs are big, use the 30 inch column below.
Which rug fits which table?
Here is the sum for the table sizes the dining table room size calculator starts from:
| Table | Plus 24 in a side | Rug | Plus 30 in a side | Rug |
|---|---|---|---|---|
| 48 × 30 in | 96 × 78 in | 8 × 10 | 108 × 90 in | 8 × 10 |
| 72 × 36 in | 120 × 84 in | 8 × 10, just | 132 × 96 in | 9 × 12 |
| 96 × 40 in | 144 × 88 in | 9 × 12, just | 156 × 100 in | 10 × 14 |
| 48 in round | 96 in across | 8 × 10 | 108 in across | 9 × 12, just |
The rug sizes are the names shops sell by: 5 × 8, 6 × 9, 8 × 10, 9 × 12 and 10 × 14 feet. In inches, an 8 × 10 is 96 by 120 and a 9 × 12 is 108 by 144.
A 6 × 9 sounds about right for the small 48 by 30 table. It is not. With the chairs counted the table needs 78 inches, and a 6 × 9 is only 72 inches wide.
Is an 8 × 10 really 8 by 10?
Often not. Many rugs sold as 8 × 10 measure 7 feet 10 by 9 feet 10. That is a metric 240 by 300 cm rug sold under the nearest name in feet.
Two inches sounds like nothing. On the six-seat table it turns 24 inches at each end into 23. Read the real size on the listing before you buy. If the table only “just” fits, as it does three times in the table above, those two inches decide it.
Will the rug fit the room?
The rug is not the only thing that wants floor. The room also needs a path behind the chairs.
Take the six-seat table again. With 36 inches all round to walk behind the chairs, the room has to be 144 by 108 inches. That is 12 by 9 feet.
Now put a 9 × 12 rug in it. A 9 × 12 is 108 by 144 inches. It runs wall to wall, and at that point it is carpet. An 8 × 10 in the same room leaves 6 inches of bare floor down each side and 12 at each end.
So in a tight dining room the rug that suits the chairs is also the biggest rug the room can take. If you want floor showing round the edge, size the rug from the chairs, not from the room.
What does not help?
A rug the size of the table. It looks tidy with the chairs pushed in. Every meal, the back legs come off the edge, and the chair rocks or catches.
A thick, shaggy pile. Chairs drag in it instead of sliding. A flat weave or a short pile lets them move, and its edge is easier to walk over on the path behind the chairs.
Paying for rug where no chair goes. A table pushed against a wall, with chairs on three sides, does not need rug on the fourth. Add the 24 inches only where a chair moves.
What about a round table?
For a round table, add 24 inches all round and treat the result as a diameter. A 48 inch table needs 96 inches. A round rug that size works, and so does any rectangle at least that wide both ways.
Put your own table and chairs into the planner. It draws the band the chairs need around the table. The rug has to cover that band, and the room has to hold the rug with a path to spare.