Why a box spring won't go up the stairs
A queen box spring is a rigid frame, 60 by 80 inches. The mattress that goes on it is the same size, but a mattress bends round a tight turn. A box spring does not. That is why the mattress makes it upstairs and the box spring sits in the hall.
The usual fix is a split foundation: two pieces, each 30 by 80 inches, that go up the stairs one at a time. Most king foundations already come this way, as two twin XL halves of 38 by 80.
Why does the mattress make it and the box spring not?
A box spring is a wooden frame with fabric stretched over it. As far as your stairs are concerned, it is a door slab 60 inches wide. You can tip it, turn it and stand it on its edge. You cannot make it shorter.
A mattress gives. Two people can fold a foam mattress, or curve a sprung one, far enough to get it round a landing. So the move that worked for the mattress tells you nothing about the box spring.
Where does it get stuck?
You carry a box spring on its long edge. It stands 60 inches tall, and from above it is 80 inches long and only as wide as it is thick. That is a thin shape, and a hallway corner can take more of it than you might think.
Say yours is 9 inches thick. Using the same corner sum as the furniture through a door planner:
| Hallway width, both sides of the turn | Longest 9 inch thick item that turns |
|---|---|
| 30 in | about 67 in |
| 36 in | about 84 in |
| 42 in | about 101 in |
An 80 inch box spring clears a 36 inch corner by about 4 inches. In a 30 inch hallway it does not go round at all. Measure your own box spring. A thinner one does better, and the planner will take its real size.
The stairs are the harder part. On a straight stair the box spring tilts as you climb. Its top end swings up toward the ceiling over the stairs, and the bottom end drags on the steps. Most US states build new homes to the International Residential Code. It asks for at least 6 feet 8 inches of headroom over a stair, and a stair at least 36 inches wide. Older houses can have less of both.
A landing with a turn is worst of all. Now the box spring has to turn a corner and climb at the same time. The planner does not check stairs or landings. Measure the landing both ways, and measure the headroom where the stair meets the ceiling above it. That is the spot where a long, tall load jams.
One of ours jammed. Taking a door or a rail off got it through.
What helps?
A split foundation. Two 30 by 80 inch halves sit side by side under a queen mattress. Each one is half as wide, and every turn above gets easier. If you are buying new and you have a tight stair, ask for split before it ships.
A different base. A platform frame or a slatted base often arrives flat in pieces and goes together in the bedroom. If the box spring is only there to lift the mattress, you may not need one at all.
Taking the door off. At the top of the stairs, the bedroom door is often the last tight spot. Lifting the door off its hinges gives you back about an inch and a half. A stair handrail on brackets can come off the same way, and gives back the inches it sticks out from the wall. The guide to getting a sofa through a door shows how.
A window. An upstairs window will sometimes take what the stairs will not. It needs a big enough window, a second person outside, and a ladder you trust.
What does not help?
Forcing it. The frame is wood. If you bend it round a turn, the frame is what gives, or the wall does.
Tipping it on the diagonal. It feels like it should help. Across the diagonal a box spring is wider than either side, so it needs a bigger gap, not a smaller one.
Taking the fabric off. The frame is the size. The cover adds almost nothing.
Can you cut a box spring in half?
People do. You cut through the fabric and the frame at the middle, then join the two halves again upstairs with plates or hinges. It works, but it is a saw job you cannot undo. Price a split foundation first.
Before you buy a bed for an upstairs room, check that the room takes it with the bed size room fit calculator. Then measure the route up to it.